|
317 Floor N’ Wall Thin Set Mortar
LATICRETE®
317 Floor N’ Wall Thin Set Mortar is a bagged cementitious powder to be mixed
with either water or latex admixtures for installing ceramic tile and natural
stone using the thin-set method of installation.Must fortify with LATICRETE® 333
Super Flexible Additive or LATICRETE® Latabond Mortar Admix for exterior use,
impervious tiles, porcelain, mosaic, glass and stone tiles, and heavy traffic
areas.
|
|
|
335 Premium Flexible Tile Adhesive
LATICRETE® 335 Flexible Premium Cementitious Adhesive is a high performance
bagged cementitious powder to be mixed with water to install low absorption
ceramic tile, porcelain tile and natural stone using the thin-set method of
installation. It is classified as a C2TES1 when tested to AS4992.1 &
2.
Pack size:
20kg Bags
Data Sheet
|
 |
|
4237 Latex Mortar Admix
LATICRETE® 4237 Latex Thin-Set Mortar Additive is a specially designed latex
additive for use with LATICRETE® 211 Crete Filler Powder to make high strength
latex thin-set bed up to 3mm thick and medium bed up to 15mm thick mortars. For
installing all types of ceramic tile, natural stone and agglomerates. Also for
use with Portland cement to make slurry bond coats for mortar beds and with thin
set mortars to give improved performance and longer open time.
Pack size: 19L Pails, 7L Pails, 1L Jugs
Data Sheet
|
 |
|
211 Crete Filler Powder
LATICRETE® 211 Crete Filler Powder is a factory prepared blend of carefully
selected raw materials, Portland Cement and graded aggregates. Designed for use
with LATICRETE® 4237 Latex Thin-Set Mortar Additive to produce a High Strength
Adhesive for Ceramic Tile and Stone that meets and exceeds the requirements of
national and international standards.
Available in Grey or White
|
 |
|
226 Thick Bed Mortar Mix
LATICRETE® 226 Thick Bed Mortar is a factory prepared blend of
carefully selected raw materials, Portland cement and graded aggregates.
Designed for use with LATICRETE® 3701 Mortar Admix to produce a latex Portland cement
mortar that has exceptional strength.
|
|
|
3701 Grout & Mortar Admix
LATICRETE® 3701 Mortar Admix is a specially designed latex admixture for use
with cement based mortars and can be used in place of water to improve the
working and physical properties of any cement mortar mix.
|
|
|
Latapoxy 310
LATICRETE® LATAPOXY® 310 Stone Adhesive is a two component, high strength epoxy
adhesive, which is formulated for spot bonding fixing method of tile and stone
installations on vertical surfaces. LATAPOXY® 310 Stone Adhesive maintains its
non-sag consistency at high temperatures up to 35°C.
|
|
|
SpectraLOCK PRO Grout
LATICRETE® SpectraLOCK PRO Grout is a patented, high performance
epoxy grout that offers colour uniformity, durability and stain resistance with
extraordinary ease of use. LATICRETE® SpectraLOCK PRO Grout is designed for use on ceramic
tile, glass tile and stone applications, both residential and commercial. It can
be used both interior and exterior on floors and walls. Ideal for re-grouting
applications, LATICRETE® SpectraLOCK PRO Grout is perfect for swimming pools,
fountains and other wet area applications.
|
|
|
PermaColor Grout
LATICRETE® PermaColor Grout is a high performance, fast setting
grout that provides a grout joint that is dense and hard.
LATICRETE® PermaColor Grout is colour consistent. Mix only with
water.
|
|
|
